FS switch notes

FS switches are divided out by series and chipsets. Devices from different series will have different Network Operating systems. Devices from within the same series may have different capabilities: PoE, staking, SFP vs SFP+, different CAM table sizes. These are good switches, I would highly recommend any of their products just read their documentation before purchasing.

FS S3400 series switches

#### Backup config via TFTP

switch-1#copy startup-config tftp [IPv4 address]
Destination file name[startup-config]?[name of file]
###
TFTP:successfully send 17 blocks, 8431 bytes

#### Load config from file

Switch-1#copy tftp running-config
TFTP server IP address: [IPv4 address]
Source configuration file name: [name of file]
Success.

FS S2805S series switches

#### Backup config via TFTP

switch-1#upload configuration tftp inet [IPv4 address] [name of file]
Uploading config file via TFTP...
Upload config file via TFTP successfully.

#### Upload config via TFTP

switch-1#load configuration tftp inet [IPv4 address] [name of file]
Startup config will be updated, are you sure(y/n)? [n]y

Downloading config file via TFTP...
Download config file via TFTP successfully, need to reboot to take effect.
switch-1#reboot
If you do not save the settings, all changes made will be lost.
Are you sure you want to proceed with the system reboot(y/n)?[n]y
#### Enabble SSH
SSH will not work untill a key has been generated. Generate keys as outline below.
crypto key generate rsa
crypto key refresh

SNMP

## Hostname
gbnPlatformOAM:hostName-[1.3.6.1.4.1.52642.1.2.1.1.2.10.0]
## Interface name
rfc1213:ifDescr-[1.3.6.1.2.1.2.2.1.2.1]
## Interface description
rfc2233:ifAlias-[1.3.6.1.2.1.31.1.1.1.18.1]
## Interace admin status
rfc1213:ifAdminStatus-[1.3.6.1.2.1.2.2.1.7.1]
##Iface input PPS
rfc1213:ifInUcastPkts-[1.3.6.1.2.1.2.2.1.11.1]
##Iface output PPS
rfc1213:ifOutUcastPkts-[1.3.6.1.2.1.2.2.1.17.1]
## Mac address table (walk this)
1.3.6.1.4.1.52642.1.2.4.1.2.1.1.1