FS switch notes =============== FS switches are divided out by series and chipsets. Devices from different series will have different Network Operating systems. Devices from within the same series may have different capabilities: PoE, staking, SFP vs SFP+, different CAM table sizes. These are good switches, I would highly recommend any of their products just read their documentation before purchasing. FS S3400 series switches ------------------------ #### Backup config via TFTP :: switch-1#copy startup-config tftp [IPv4 address] Destination file name[startup-config]?[name of file] ### TFTP:successfully send 17 blocks, 8431 bytes #### Load config from file :: Switch-1#copy tftp running-config TFTP server IP address: [IPv4 address] Source configuration file name: [name of file] Success. FS S2805S series switches ------------------------- #### Backup config via TFTP :: switch-1#upload configuration tftp inet [IPv4 address] [name of file] Uploading config file via TFTP... Upload config file via TFTP successfully. #### Upload config via TFTP :: switch-1#load configuration tftp inet [IPv4 address] [name of file] Startup config will be updated, are you sure(y/n)? [n]y Downloading config file via TFTP... Download config file via TFTP successfully, need to reboot to take effect. switch-1#reboot If you do not save the settings, all changes made will be lost. Are you sure you want to proceed with the system reboot(y/n)?[n]y | #### Enabble SSH | SSH will not work untill a key has been generated. Generate keys as outline below. :: crypto key generate rsa crypto key refresh SNMP ^^^^ | ## Hostname | ``gbnPlatformOAM:hostName-[1.3.6.1.4.1.52642.1.2.1.1.2.10.0]`` | ## Interface name | ``rfc1213:ifDescr-[1.3.6.1.2.1.2.2.1.2.1]`` | ## Interface description | ``rfc2233:ifAlias-[1.3.6.1.2.1.31.1.1.1.18.1]`` | ## Interace admin status | ``rfc1213:ifAdminStatus-[1.3.6.1.2.1.2.2.1.7.1]`` | ##Iface input PPS | ``rfc1213:ifInUcastPkts-[1.3.6.1.2.1.2.2.1.11.1]`` | ##Iface output PPS | ``rfc1213:ifOutUcastPkts-[1.3.6.1.2.1.2.2.1.17.1]`` | ## Mac address table (walk this) | ``1.3.6.1.4.1.52642.1.2.4.1.2.1.1.1`` Resources --------- * S3400 refrence guide: `https://resource.fs.com/mall/doc/20230602224707z9fqeu.pdf `_ * S2805s refrence guide: `https://resource.fs.com/mall/doc/20240103181927up3qye.pdf `_